1.4v HDMI Matrix 2 x2
HDMI Matrix 2 x 2 is a 2-by-2 DVI/HDMI matrix supporting 4Kx2K resolution. It allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on two displays simultaneously, no matter the source is with HDCP encryption or not. Extra infrared receiver port is supplied for remote control. It offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and projector factory, data center control, information distribution, conference room presentation, school and corporate training environments, etc.
1.Support display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
2.3D HDMI 1.4a video format support.
3.3D video support including Frame packing for all 3D formats up to a 297MHz TMDS clock.
4.Supports deep color up to 48-bit per pixel.
5.HDCP 1.4 support (input), HDCP v1.4a protocol compliant (output).
6.Supports the reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR.
7.Full colorimetry including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color.
8.Operates for TMDS clock frequencies up to 300MHz.
|Input Ports||2 x HDMI Female input ports|
|Output Ports||2 x HDMI Female output ports|
|Power Supply||DC 5V 1A|
|ESD Protection Human Body Model|| ± 8kV (air-gap discharge)
± 4kV (contact discharge)
|Dimensions (mm)||70(W) X 145 (D) X 25 (H)|
|Operating Temperature||0°C ~ 40°C / 32°F ~ 104°F|
|Storage Temperature||-20°C ~ 60°C / -4°F ~ 140°F|
|Relative Humidity||20 ~ 90% RH (Non-condensing)|
|Power Consumption (Max)||5W|
Operation controls and Functions
1.ON/OFF: Power on/off switch.
2.POWER LED: This red LED illuminates when the device is connected with power supply.
3.INPUT LED: These red LED illuminate when the output select to the corresponding input.
4.EDID LED: These red LED illuminate when the EDID select to corresponding items.
2.0 CH LED illuminate indicate that force to output 2.0CH audio and 1080P video.
5.1 CH LED illuminate indicate that force to output 5.1CH audio and 1080P video.
7.1CH LED illuminate indicate that force to output 7.1CH audio and 1080P video.
AUTO LED illuminates indicate that in AUTO mode.
5.IR IN: Remote control signal receive.
6.OUTPUT A: Press this button to select the input source to HDMI OUT A.
7.OUTPUT B: Press this button to select the input source to HDMI OUT B.
8.AUDIO: Press this button to select the 2.0CH, 5.1CH, 7.1CH audio output mode.
9.AUTO: Press this button to into AUTO mode
1.HDMI OUTPUT: These slots are where you connect the HDTV or monitor with HDMI cable.
2.HDMI INPUT: These slots are where you connect the HDMI source output from DVD, PS3.
3.DC IN: Plug the 5V DC power supply into the unit and connect the adapter to AC wall outlet.